•  4 - sewn links for use of rescue spreader bars or suspension trauma straps.
• 2 - 1/2 condensed foam leg pads for extra protection in a fall.
• 1- Front Fall mount forged Steel 5,000 lb rated ANSI Z359.12 compliant
• 1 - Rear Fall Mount forged Steel 5,000 lb rated ANSI Z359.12 compliant.
• Harness made of 6,000 or 7,000-lb. nylon webbing depending on color.
• Harness made of 1000 text Nylon
• Adjustable steel quick-release buckle rated at 17.84kN.
• Harnesses are manufactured to meet specifications according to meet OSHA 1926.502, ANSI Z359.1-1992, ANSI A10.14-1991, CSA Z259.1-1976, CSA Z259.10-M90, Berry Amendment Compliant.
• Made in USA.
• Very light weight 2.5 lbs
• Harness capacity: 420-lbs

11" Speader Bar will attach to harness and can be used as a rescue device lowered to a worker to attach to their harness putting the worker in a sitting position giving the person more time before they suffer from Ortho Static Intolerance while being lowered to the ground.

Adjustable Stir Ups can be attached to these harnesses in situations where there is a extreme risk of falling such as Steel workers.

Padded Work Seats can also be attached to harnesses if working in a seated position.

• One large standard Dorsal fall mount on the rear for fast and easy connections with a nylon covered pad as a base.
• Single front D ring fall mount on the front of the chest is an additional fall mount for use with a rope or cable stop devices used when climbing ladders or towers.
• Padded belt " pad acting as a built in back brace to protect against hernias, muscle tearing, or lower spine damages.
• Resin coated belt makes it easy to use tool belts with, or clip on accessories, to transport hand tools.
• Padded seat is sewn to belt pad in 4 locations, creating a very large "net link" to the trunk of the body, as that is what absorbs the majority of initial impact of a fall instead of the inside of the thighs, which prevents muscle trauma. Also includes two sewn loops for alternative rescue.
• Adjustable suspenders have sewn loops on the front for hand tool lanyards, and rescue spreader bar for alternative rescues. Come with one adjustable chest strap to keep harness in place comfortably at all times.
• Shoulder pads add great comfort and help prevent reddening of the skin or bruising on the neck or shoulders. Users find this feature a favorite over the standard harness.
• Leg pads add great comfort when wearing a harness. They provide additional protection against muscle trauma in the legs which usually occurs after an actual fall.
• Four steel quick connect buckles, all buckles have indicators to show if they are fully closed. This makes it very easy to put on, off, or adjust the harness for any person very quickly within the range of the harness. Rated 17.84 KN (over 4,000 lbs.)
• Harness designed to prevent damage to sexual organs during a fall. Our feature provides the leg straps placed lower on the body net link of the harness. When a fall takes place the leg straps are not pulled at the same dangerous angle as standard harnesses, preventing loss or removal of human gender.
• Harnesses are manufactured to meet specifications according to meet OSHA 1926.502, ANSI Z359.1-1992, ANSI A10.14-1991, CSA Z259.1-1976, CSA Z259.10-M90, Berry Amendment Compliant
• Harness capacity 420-lbs.
• Lightweight.
• Extremely durable.
• Made in USA.

11" Speader Bar will attach to harness and can be used as a rescue device lowered to a worker attaches to their harness putting the worker in a sitting position giving the person more time before they suffer from Ortho Static Intolerance while being lowered to the ground.

Padded Work Seats can also be attached to harnesses if working in a seated position.

• The Air Trek is now being changed to only have one rear fall mount.
• The Air Trek utilizes an H-style design to eliminate the self-tightening effect that occurs with most other current harnesses that use the X design.
• Offers many more levels of protection against suspension trauma, including a padded chest strap, padded back brace, padded rappelling seat, and padded leg straps.
• Made with woven TEX1000 Nylon Cordura over Verathane foam for durability and exceptional comfort not offered by any other harnesses.
• Tower or pole climbing is more comfortable than ever before with this large comfortable seat transferring all the weight off of your lower back with low profile V rings.
• Harness is fully adjustable and features 6 additional metal adaptors, each rated at 3,000-lbs., which adjust for exact seat positioning.  Chest strap is low enough that a person won't hang from their arms.
• Breaking tensile strength 6,000-7,000 lbs. [depending on color]
• Harness stands up to orthostatic intolerance.
• Most advanced tool lanyard system available.
• Most versatile and comfortable harness available.
• All material, except clips, buckles, etc., 100% woven TEX1000 Nylon.
• Can easily be hand-washed with soap and water.
• Harness capacity: 420-lbs.
• Custom sizes available.
• Lightweight.
• Extremely durable.
• Tool lanyard, quick-rappel accessory Available.
• Made in USA according to OSHA 1926.502, ANSI Z359.1-1992, ANSI A10.14-1991, CSA Z259.1-1976, CSA Z259.10-M90, Berry Amendment Compliant.

• Harnesses are manufactured to meet specifications according to meet OSHA 1926.502, ANSI Z359.1-1992, ANSI A10.14-1991, CSA Z259.1-1976, CSA Z259.10-M90, Berry Amendment Compliant
• Electric, tower, pole climbing harness with medium size pole climbing rings.
• H-harness configuration is adjustable with 4 Steel spring loaded adapters to quickly fit into harness with a true Load - Bearing system to transport tools and equipment.
• 1/2 closed cell condensed foam offers acceptional back support protecting workers from back injuries, adjustable belt has 4" x "8 Velcro for firm locking action to your specific pressure.
• 2 - 5,000 lb Fall mounts on Front of harness for climbing ladders, and Rear of harness for standard safety fall position.
• 2 - Steel Delta Mounts for Spreader Bar, padded work seats, emergency rescue, retrieval, or rapelling situations.
• 2- Medium size Belt mounted Positioning Steel rings for Adjustable Lanyards for climbing.
• Made with 6,000 - 7000-lb. nylon webbing depending on color sewn with 138 TEX nylon thread.
• 17.8 KN Steel quick-connect adjustable buckles offer very fast mounting/dismounting.
• Safety tags on rear of harness in protective cover.
• Harness capacity 420-lbs.
• Lightweight.
• Extremely durable.
• Made in USA.

Optional gray water-resistant PVC-coated nylon or gray fire-resistant material with FR hardware with Velcro wrap covers to insulate steel buckles. ( Not Included) 

11" Speader Bar will attach to harness and can be used as a rescue device lowered to a worker attaches to their harness putting the worker in a sitting position giving the person more time before they suffer from Ortho Static Intolerance while being lowered to the ground.

Adjustable Stir Ups can be attached to these harnesses in situations where there is a extreme risk of falling such as Steel workers.

Padded Work Seats can also be attached to harnesses if working in a seated position.

The Voyager Harness is the same design as the Air Trek, and The Fall Master Except it is has 8 Steel quick connect buckles rated at 4,000 lbs each making it easy to make separate the harness into a full body harness or a half harness for rappelling or exploration.

The rappelling seat will detach as well as the harness so it could be a rigging belt only.

, Harnesses are manufactured to meet specifications according to meet NFPA 1983 Class lll, OSHA 1926.502, ANSI Z359.1-1992, ANSI A10.14-1991, CSA Z259.1-1976, CSA Z259.10-M90, Berry Amendment Compliant, Accessories not included.